BFC237012224 查看數據表（PDF） - Vishay Semiconductors

零件编号

产品描述 (功能)

比赛名单

BFC237012224

DC Film Capacitors MKT Radial Potted Type

Vishay Semiconductors 

www.vishay.com

MKT370

Vishay BCcomponents

MOUNTING

Normal Use

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for

mounting in printed-circuit boards by means of automatic insertion machines.

For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 or end of catalog.

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit

board:

• For pitches  15 mm capacitors shall be mechanically fixed by the leads

• For larger pitches the capacitors shall be mounted in the same way and the body clamped

Space Requirements on Printed Circuit Board

The maximum space for length (lmax.), width (wmax.) and height (hmax. ) of film capacitors to take in account on the printed circuit

board is shown in the drawings.

• For products with pitch  15 mm, w = l = 0.3 mm; h = 0.1 mm

Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product

concerned.

Eccentricity

wmax. = W + Δ

Imax. = I + Δ

CBA116

hmax. = h + Δ

Seating plane

SOLDERING CONDITIONS

For general soldering conditions and wave soldering profile, we refer to the application note: 

“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171

Storage Temperature

Tstg = -25 °C to +35 °C with with relative humidity of maximum 75 % without condensation

Ratings and Characteristics Reference Conditions

Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of

86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.

For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at

the rated temperature and a relative humidity not exceeding 20 %.

Revision: 10-Apr-2019

8

Document Number: 28108

For technical questions, contact: dc-film@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: