JW1AFHN-B-DC12V-F 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
比赛名单
JW1AFHN-B-DC12V-F Datasheet PDF : 9 Pages
| |||
JW
2. Specifications
Characteristics
Item
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Min. switching capacity (reference value)*1
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Between open contacts
Between contact and coil
Between contact sets
Surge breakdown voltage*2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20°C 68°F)
Release time (at nominal voltage) (at 20°C 68°F)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical (at 180 times/min.)
Conditions
Conditions for operation, transport and storage*3
Unit weight
Specifications
Standard type
High capacity type
1 Form A: AgSnO2 type
1 Form C, 2 Form A and 2 Form C: AgNi type
1 Form A, 1 Form C, 2 Form A and 2 Form C
1 Form A and 1 Form C
Max. 100 mΩ (By voltage drop 6 V DC 1A)
5A 250V AC, 5A 30V DC
10A 250V AC, 10A 30V DC
1,250VA, 150W
2,500VA, 300W
250V AC, 30V DC
5A
10A
100mA, 5V DC
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
5,000 Vrms for 1 min. (Detection current: 10 mA)
3,000 Vrms for 1 min. (2 Form A, 2 Form C) (Detection current: 10 mA)
10,000 V
Max. 15 ms (excluding contact bounce time.)
Max. 5 ms (excluding contact bounce time) (Without diode)
98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 2.0 mm
Min. 5×106
Ambient temperature*4: –40°C to +60°C –40°F to 140°F (Class E),
(Class B: –40°C to +85°C –40°F to 185°F)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 13 g .46 oz
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. The pick-up and drop out voltages rise approximately 0.4% for every 1°C 33.8°F given a standard ambient temperature of 20°C 68°F. Therefore, when using relays
where the ambient temperature is high, please take into consideration the rise in pick-up and drop out voltages and keep the coil applied voltage within the
maximum applied voltage.
3. Electrical life
Condition: Resistive load, at 6 times/min.
Types
1 Form A, 1 Form C,
2 Form A, 2 Form C
1 Form A, 1 Form C
Switching capacity
5A 250V AC
5A 30V DC
10A 250V AC
10A 30V DC
No. of operations
Min. 1×105
Min. 1×105
Min. 1×105
Min. 1×105
REFERENCE DATA
JW 1 Form A Standard (5A) type
1. Maximum operating power
100
10
1
DC resistive AC resistive
load
load
10
100
Contact voltage, V
1,000
2. Operate/release time
Sample: JW1aSN-DC12V-F, 10 pcs.
Ambient temperature: 20°C 68°F
10
Operate time
5
Mx- ax.
Min.
Release time
Mx- ax.
Min.
0
80 90 100 110 120
Coil applied voltage, %V
3. Life curve
1 Form A Standard (5 A) type
100
250 V AC resistive load
30 V DC resistive load
10
5
10
15
Contact current, A
–3–
ASCTB190E 201702-T
Share Link: 