DF65 查看數據表（PDF） - HIROSE ELECTRIC
零件编号
产品描述 (功能)
比赛名单
DF65 Datasheet PDF : 6 Pages
| |||
DF65 Series●1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
■Product Specifications
Ratings
No. of Contacts 24 AWG 26 AWG 28 AWG Operating Temperature Range −40 to ＋105℃（注２）
3
Operating aHumidity Range
20 to 80％（注３）
Current
4
4A 2.5A 2.5A Storage Temperature Range −10 to ＋60℃（注４）
Rating
5
Storage Humidity Range
40 to 70％（注４）
6
7
3.5A 2A
2A
UL/C-UL/File No. and Recognition No.
UL ：E52653
Voltage Rating Specification
AC/DC 50V
C-UL ：E52653
Item
Specifications
Conditions
1. Insulation
resistance
2. Withstand voltage
3.Contact resistance
100Mø min.
No flashover or breakdown
10mø max.
Measured at DC 100V
AC 500V is applied for one minute.
Measured at 1mA and no higher than 20mV
4. Vibration
Resistance
5. Shock Resistance
No electrical discontinuity for more than 1µs
No electrical discontinuity for more than 1µs
10 cycles in each of three directions at frequency
10-55 Hz, half amplitude 0.75mm
Accelerated velocity : 490m/s2, for 11 ms, half-sine in 3
directions, 3 times for each of the three directions
6. Moisture-
resistance
7. Temperature
cycles
8. Durability
Contact resistance : 20mø max.
Insulation resistance : 500Mø min.
Contact resistance : 20mø max.
Insulation resistance : 500Mø min.
Contact resistance : 20mø max.
Temperature : 40 ±2ç ; humidity : 90 to 95%, left
as it is for 96 hours
-55ç : 30 minutes → 5 - 35ç : 2 - 3 minutes
→ 85℃ : 30 minutes → 5 - 35ç : 2 - 3 minutes)
5 cycles
Tin plated : 30 mating cycles
Gold plated : 50 mating cycles
9. Resistance to
solder heat
The resin components will not become
deformed or lose performance due to
deformities
Reflow : according to the recommended
temperature profile
Hand soldering : temperature of soldering iron at
350ç±10ç for 3 seconds
Note 1 : This is the maximum current rating while all pins are powered or used as all power lines. If you split the current over
multiple lines, please factor in your own safety margin. Please contact Hirose Electric, for inquiries on the assignment
of pins and on the currents that can be delivered.
Note 2 : Includes the temperature rise of power lines.
Note 3 : Use without condensation on parts.
Note 4 : The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating
temperature for temporary storage such as pre-assembly and during shipping.
■Materials / Finish
Product
Header
Crimp socket
Crimp contact
Part
Insulator
Contact
Insulator
Contact
Materials
LCP
Brass
LCP
Phosphorous Bronze
Finish
Black
Tin Plated or Gold plated
Beige
Tin Plated or Gold plated
UL specification
UL94V-0
−
UL94V-0
−
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
●Header connector
DF 65 - * P - 1.7 V
❶❷
❸❹
❺❻
●Socket connector
❶Series Name：DF
❷Series No. : 65
❸Number of contacts : 3, 4, 5, 6, 7
❹Connector type
P:Header
❺Pitch : 1.7mm
❻Mounting style
Ｖ : SMT Straight Type
DF 65 - * S - 1.7 C
❶❷
❸❹
❺❻
●Crimp contact
❶Series Name : DF
❷Series No. : 65
❸Number of contacts: 3, 4, 5, 6, 7
❹Connector type
S：socket
❺Pitch : 1.7mm
❻Termination form
C : crimp case
DF 65 - 2428 SCF
❶
❷
❶Applicable wire size
2428：24 to 28 AWG
❷Packaging style
SCF : Socket contac・t Ree・l Tin plated
SCFA : Socket contac・t Ree・l Gold plated
2
Share Link: 