C10-642495-241 查看數據表（PDF） - Amphenol Aerospace

零件编号

产品描述 (功能)

比赛名单

C10-642495-241

Amphenol® Industrial RADSOK® Products for Printed Circuit Boards

Amphenol Aerospace 

RADSOK® PCB RADSERTTM

Choose the Amphenol® RADSERTTM design when you need the most power in a single-point

connection to the PCB. The RADSERT allows the board designer to bring power to the board

from busbars suspended above the board and all of the board components. Pins from the

busbar plug into the RADSOK’s which are installed by press fitting the RADSOK into the

RADSERT.

The RADSERT is press-fit into plated-through holes in the PCB. It

provides the smallest footprint and is available in 2.4mm and

3.6mm for board thicknesses of .250” +/– .025”. Other sizes may

be custom designed to meet your specific application require-

ments.

• High power to board interconnect in a small package

• Hyperbolic socket design ensures many points of contact

• Solder version or pre-loaded RADSERTS are installed

during board fabrication

• 2.4mm RADSERT carries up to 35 Amps

• 3.6mm RADSERT carries up to 70 Amps

• No special crimp tools required

• No threaded fasteners

• Eliminates risk of PTH cracking or delamination

in board

• Faster through-put

• RoHs compliant

Sample part numbers:

C10-642495-241 designates 2.4mm RADSERT (solder)

C10-639772-001 designates 2.4mm RADSERT (one piece pre-loaded)

C10-642865-001 designates 3.6mm RADSERT (solder, short)

C10-642449-001 designates 3.6mm RADSERT (one piece, pre-loaded, short)

Closeup of 3.6mm

RADSERTTM installed

into PC board

Thickness of board: .250” +/.025”

3.6mm RADSERTTM

and inner RADSOK®

RADSOK® PCB PGYTM

The RADSOK® PGYTM is an orthogonal card edge connector series, avail-

able in 3.6mm and 5.7mm contact sizes. The 5.7mm RADSOK® PGY is

Amphenol’s highest current board level product rated to 120 amperes. The

RADSOK® PGY connects to the board through a solder reflow process. The

busbar pin will mate horizontally with the RADSOK® slightly above the board.

• Orthogonal connection between card edge and busbar/backplane

• Compact footprint

• Legs of the PGY dissipate high power evenly

• 5.7mm carries up to 120 Amps

• 3.6mm carries up to 70 Amps

• No threaded fasteners

• No special crimp tools required

• RADSOK’s highest power to board level product

• Faster through-put

• RoHs compliant

Sample part numbers:

C10-639800-001 designates 5.7mm PCB mount RADSOK®, horizontal, solder, silver plated

Dimensions: .563” (L) x .551” (D) x .791” (OAH) - (.653” above board and .138” into PCB)

C10-639801-001 designates PCB mount RADSOK®, horizontal, solder, silver plated

Dimensions: .480” (L) x .400” (D) x .630” (OAH) - (.492” above board and .138 into PCB)

Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but

are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent

infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.

AMPHENOL is a registered trademark of Amphenol Corporation.

@2007 Amphenol Corporation

Amphenol

Printed in U.S.A. 11/2007

Share Link: