E211SYWSE 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

比赛名单

E211SYWSE

Sealed Miniature Toggle Switches

Unspecified 

E Series

Sealed Miniature Toggle Switches

Features/Benefits

• Sealed against solder and cleaning

process contaminants

• UL 94V-0 Nylon case and bushing

• Multi-positions

• ESD protection available

• RoHS compliant models available

Typical Applications

• Telecommunications

• Instrumentation

• Medical equipment

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. Q contact material: E1XX & E2XX

MODELS: 7.5 AMPS @ 125 V AC or 28 V DC;

3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @

125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page

F-24 for additional ratings.

ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break

cycles at full load. E3XX models: 30,000 cycles.

CONTACT RESISTANCE: Below 10 mΩ typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109 Ω min.

ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive

bushing only. Dissipates up to 20,000 V DC from actuator

to ground.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

DEGREE OF PROTECTION: IP57; Protection against harmful dust

deposit, full-scale voltage protection, temporary immersion.

Materials

CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat

stabilized (UL 94V-0). F1 conductive bushing option is

impregnated with carbon fibers.

ACTUATOR: Brass, chrome plated with internal o-ring seal standard.

SWITCH SUPPORT: Brass or steel, matte-tin plated.

SWITCH SUPPORT RETAINER: Stainless steel.

CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper alloy,

silver plated. See page F-24 for additional contact materials.

TERMINAL SEAL: Epoxy.

HARDWARE: Nut & Locking ring: Brass, nickel plated.

Lockwasher: Steel, nickel plated.

NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant

and compatible.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages F–18 thru F–24. For additional options not shown in catalog, consult our Customer Service Center. All

models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

E101 SP, On-None-On

E103 SP, On-Off-On

E105 SP, Mom.-Off-Mom.

E107 SP, On-Off-Mom.

E108 SP, On-None-Mom.

E201 DP, On-None-On

E203 DP, On-Off-On

E205 DP, Mom.-Off-Mom.

E207 DP, On-Off-Mom.

E208 DP, On-None-Mom.

E211 DP, On-On-On

E213 DP, On-On-Mom.

E215 DP, Mom.-On-Mom.

**E301 3P, On-None-On

* F1 available with SP and DP

versions only, please see

page F-19

Actuator

M .300" high

S .500" high

L3 Plastic, .940" high

Bushing

D1 .250" high

*F1 Conductive,

.250" high

D9 .280" high

**Y Threaded, .350" high

Terminations

A Right angle, PC thru-hole

AV2 Vertical right angle, PC thru-hole

C PC Thru-hole

V3 .460" high, V-bracket

Z Solder lug

A3 Right angle, PC thru-hole

AV3 Vertical right angle, PC thru-hole

V6 .460" high, V-bracket

V9 1.150" high, V-bracket

V31 .460" high, snap-in V-bracket

V61 .460" high, snap-in V-bracket

W .750" long, wire wrap

Z3 Quick connect

** Y threaded bushing available

for 1 & 2 pole only

F–17

Contact Material

B Gold

P Gold, matte-tin

Q Silver

S Silver, matte-tin

G Gold over silver

R Gold over silver, matte-tin

Seal

F

E Epoxy

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

Share Link: