datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

BA7357 查看數據表(PDF) - ROHM Semiconductor

零件编号
产品描述 (功能)
比赛名单
BA7357
ROHM
ROHM Semiconductor ROHM
BA7357 Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Video ICs
VIF / SIF signal processor
BA7357S
The BA7357S is a multi-format (M, B / G, D / K, and I) VIF / SIF signal processor for television and VCR applications.
It features a built-in sound-trap and band-pass filters, and employs a pulse-count audio detector that does not require
adjustment. This IC reduces external component requirements, and allows space savings.
Applications
TVs and VCRs
Features
1) Separate-carrier PLL with full synchronous detec-
tion. Excellent DG / DP, CS beat (920kHz) and
cross color. In addition, by pulling down the SIF
input (pin 9) it can be used as an intercarrier.
2) The IF AGC time constant is dual-layered to allow
faster speeds.
3) The variable-gain amplifier has excellent linearity to
ensure low distortion, and AGC variance and tem-
perature drift have been minimized.
4) Significant improvement in image quality through
use of a filter that reduces CS beat.
5) Built-in SOUND filter (4.5MHz SOUND Trap and
4.5MHz SOUND BPF).
The MODE switch can be used to switch the
SOUND filter frequency band to match the transmis-
sion format (M: 4.5, B / G: 5.5, I: 6.0, D / K:
6.5MHz).
6) The audio detector uses a pulse-counter detector
that does not require adjustment, eliminating the
need for a detector coil. Broad S-curve for multiplex
broadcast compatibility.
7) Use of pulse-counter detection and the built-in
SOUND filter means fewer pins, external compo-
nents and adjustment locations are required. The IC
is available in a 22-pin SDIP package and will
enable cost and space savings.
Absolute maximum ratings (Ta = 25°C)
Parameter
Applied voltage
Power dissipation
Symbol
VCCMax.
PdMax.
Limits
10.51
12502
Unit
V
mW
Operating temperature
Topr
– 15 ~ + 70
°C
Storage temperature
Tstg
– 40 ~ + 150
°C
Pin 2 applied voltage
VP2Max.
10.5
V
1 24resistor connected between VCC and Vreg.
2 Reduced by 10mW for each increase in Ta 1°C over 25°C.
Recommended operating conditions (Ta = 25°C)
Parameter
Symbol
Limits
Unit
Power supply voltage (9V)
Power supply voltage (12V)
VCC9V
8.8 ~ 9.21
V
VCC12V
11.7 ~ 12.32
V
Guaranteed operating power
supply voltage
VCC
8.5 ~ 9.51
V
1 24resistor connected between VCC and Vreg.
2 56resistor connected between VCC and Vreg.
1

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]