LC863320B 查看數據表（PDF） - SANYO -> Panasonic

零件编号

产品描述 (功能)

比赛名单

LC863320B

8-Bit Single Chip Microcontroller

SANYO -> Panasonic 

LC863364B/56B/48B/40B/32B/28B/24B/20B/16B

(5) Ports

- Input / Output Ports

: 5 ports (28 terminals)

Data direction programmable in nibble units

: 1 port (8 terminals)

(If the N-ch open drain output is selected by option, the corresponding port data can be read in output mode.)

Data direction programmable for each bit individually: 4 ports (20 terminals)

- Input port

: 1 port (1 terminal)

(6) AD converter

- 5 channels × 8-bit AD converters

(7) Serial interfaces

- IIC-bus compliant serial interface (Multi-master type)

Consists of a single built-in circuit with two I/O channels.

be connected internally.

- Synchronous 8-bit serial interface

The two data lines and two clock lines can

(8) PWM output

- 3 channels × 7-bit PWM

(9) Timer

- Timer 0 : 16-bit timer/counter

With 2-bit prescaler + 8-bit programmable prescaler

Mode 0 : Two 8-bit timers with a programmable prescaler

Mode 1 : 8-bit timer with a programmable prescaler + 8-bit counter

Mode 2 : 16-bit timer with a programmable prescaler

Mode 3 : 16-bit counter

The resolution of timer is 1 tCYC.

- Timer 1 : 16-bit timer/PWM

Mode 0 : Two 8-bit timers

Mode 1 : 8-bit timer + 8-bit PWM

Mode 2 : 16-bit timer

Mode 3 : Variable bit PWM (9 to 16 bits)

In mode0/1,the resolution of Timer1/PWM is 1 tCYC

In mode2/3,the resolution is selectable by program; tCYC or 1/2 tCYC

- Base timer

Generate every 500ms overflow for a clock application (using 32.768kHz crystal oscillation for the

base timer clock)

Generate every 976µs, 3.9ms, 15.6ms, 62.5ms overflow (using 32.768kHz crystal oscillation for the

base timer clock)

Clock for the base timer is selectable from 32.768kHz crystal oscillation, system clock or

programmable prescaler output of Timer 0

(10) Remote control receiver circuit (connected to the P73/INT3/T0IN terminal)

- Noise rejection function

- Polarity switching

(11) Watchdog timer

External RC circuit is required

Interrupt or system reset is activated when the timer overflows

3/22

Share Link: