ICX058AL 查看數據表（PDF） - Sony Semiconductor

零件编号

产品描述 (功能)

比赛名单

ICX058AL

1/3-inch CCD Image Sensor for EIA Black-and-White Video Camera

Sony Semiconductor 

ICX058AL

6. Dark signal shading

After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark

signal output and substitute the values into the following formula.

∆Vdt = Vdmax – Vdmin [mV]

7. Flicker

Set to standard imaging condition II. Adjust the luminous intensity so that the average value of the signal

output is 200mV, and then measure the difference in the signal level between fields (∆Vf [mV]). Then

substitute the value into the following formula.

F = (∆Vf/200) × 100 [%]

8. Lag

Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it

strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following

formula.

Lag = (Vlag/200) × 100 [%]

FLD

SG1

Strobe light

timing

Output

Light

Signal output 200mV Vlag (lag)

– 11 –

Share Link: