1N5807 查看數據表（PDF） - M/A-COM Technology Solutions, Inc.

零件编号

产品描述 (功能)

比赛名单

1N5807

Rectifier Diode Series Ultrafast Recovery

M/A-COM Technology Solutions, Inc. 

1N5807(US), 1N5809(US), 1N5811(US)

Rectifier Diode Series

Ultrafast Recovery

Outline Drawings

Rev. V1

Dimensions

Min.

Inches

Max.

Millimeters

Min.

Max.

BD

0.115

0.142

2.92

3.61

BL

0.130

2.92

3.30

7.62

LD

0.3.6

3.61

0.91

1.07

LL

0.900

0.300

22.86

33.02

Notes:

1. Dimensions are in inches. Millimeters are given for general information only.

2. Dimension BL shall include the entire body including slugs and sections of the lead over which the

3. diameter is uncontrolled. This uncontrolled area is defined as the zone between the edge of the diode

4. body and extending 0.050 inch (1.27 mm) onto the leads.

5. Dimension BD shall be measured at the largest diameter.

6. Dimensions are pre-solder dip.

7. Minimum clearance of glass body to mounting surface on all orientations.

8. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.

Notes

3

2

2

—

Dimensions

D

B

ECT

S

Inches

Min.

Max.

0.137 0.148

0.200 0.225

0.19

0.028

0.900

—

Millimeters

Min.

Max.

3.84

3.76

5.08

5.72

0.48

0.71

0.008

—

Dimensions

Inches

Millimeters

A

0.288

7.320

B

0.070

1.780

C

0.155

3.940

Note: If mounting requires adhesive separate from the

solder, an additional 0.080 inch diameter contact may be

placed in the center between the pads as an optional spot

for cement.

3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Share Link: