M40Z300MH1F(2007) 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

比赛名单

M40Z300MH1F
(Rev.:2007)

5V or 3V NVRAM supervisor for up to 8 LPSRAMs

STMicroelectronics 

M40Z300, M40Z300W

1

Description

Description

Caution:

The M40Z300/W NVRAM SUPERVISOR is a self-contained device which converts a

standard low-power SRAM into a non-volatile memory. A precision voltage reference and

comparator monitors the VCC input for an out-of-tolerance condition.

When an invalid VCC condition occurs, the conditioned chip enable outputs (E1CON to

E4CON) are forced inactive to

failure, the SRAM is switched

write-protect the stored

from the VCC pin to the

data in

lithium

the

cell

SRAM. During a power

within the SNAPHAT® to

provide the energy required for data retention. On a subsequent power-up, the SRAM

remains write protected until a valid power condition returns.

The 28-pin, 330mil SOIC provides sockets with gold plated contacts for direct connection to

a separate SNAPHAT housing containing the battery. The SNAPHAT housing has gold

plated pins which mate with the sockets, ensuring reliable connection. The housing is keyed

to prevent improper insertion. This unique design allows the SNAPHAT battery package to

be mounted on top of the SOIC package after the completion of the surface mount process

which greatly reduces the board manufacturing process complexity of either directly

soldering or inserting a battery into a soldered holder. Providing non-volatility becomes a

“SNAP.” The 16-pin SOIC provides battery pins for an external user-supplied battery.

Insertion of the SNAPHAT housing after reflow prevents potential battery damage due to the

high temperatures required for device surface-mounting. The SNAPHAT housing is also

keyed to prevent reverse insertion.

The 28-pin SOIC and battery packages are shipped separately in plastic anti-static tubes or

in tape & reel form. For the 28-lead SOIC, the battery/crystal package (e.g., SNAPHAT) part

number is “M4ZXX-BR00SH” (see Table 13 on page 23).

Do not place the SNAPHAT battery top in conductive foam, as this will drain the lithium

button-cell battery.

5/25

Share Link: