MIK2576S-3.3 查看數據表（PDF） - Estek Electronics Co. Ltd
零件编号
产品描述 (功能)
比赛名单
MIK2576S-3.3 Datasheet PDF : 8 Pages
| |||
LM2576 Series
Description
The MIK2576 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching
regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V,
5V, 12V, 15V, and an adjustable output versions. Requiring a minimum number of external components, these regulators are simple to
use and include internal frequency compensation and a fixed-frequency oscillator. The MIK2576 series offers a
high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some
cases no heat sink is required. A standard series of inductors optimized for use with the MIK2576 are available from several different
manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a guaranteed ± 4%
tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External
shutdown is included, featuring 50µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as
thermal shutdown for full protection under fault conditions.
Note: The MIK2576HV is not produced yet.
Features
• 3.3V, 5V, 12V, 15V, and adjustable output versions
• Adjustable version output voltage range
• 1.23V to 37V (57V for HV version) ±4% max over line
and load conditions
• Guaranteed 3A output current
• Wide input voltage range, 40V up to 60V for HV
version
• Requires only 4 external components
• 52 kHz fixed frequency oscillator
• TTL shutdown capability, low power standby mode
• High efficiency
• Uses readily available standard inductors
• Thermal shutdown and current limit protection
Applications
• Simple high-efficiency step-down (buck) regulator
• Efficient pre-regulator for linear regulators
• On-card switching regulators
• Positive to negative converter (Buck-Boost)
Typical application Figure 1.(Fixed Output Voltage Versions)
7V - 40V
(60V for HV)
UNREGULATED
DC INPUT
MIK2576/ FEEDBACK
+VIN
1
MIK2576HV- 4
5.0
OUTPUT
L1
2
100
+
3
5 ON/OFF
H
+
GND
CIN
D1
1N5822
COUT
1000
F
+5V
REGULATED
OUTPUT
3A
LOAD
BEIJING ESTEK ELECTRONICS CO.,LTD
1
Share Link: 