IN74HC651N 查看數據表（PDF） - Integral Corp.

零件编号

产品描述 (功能)

比赛名单

IN74HC651N

Octal 3-State Bus Transceivers and D Flip-Flops High-Performance Silicon-Gate CMOS

Integral Corp. 

TECHNICAL DATA

IN74HC651

Octal 3-State Bus Transceivers

and D Flip-Flops

High-Performance Silicon-Gate CMOS

The IN74HC651 is identical in pinout to the LS/ALS651. The

device inputs are compatible with standard CMOS outputs; with pullup

resistors, they are compatible with LS/ALSTTL outputs.

These devices consists of bus transceiver circuits, D-type flip-flop,

and control circuitry arranged for multiplex transmission of data

directly from the data bus or from the internal storage registers.

Direction and Output Enable are provided to select the read-time or

stored data function. Data on the A or B Data bus, or both, can be

stored in the internal D flip-flops by low-to-high transitions at the

appropriate clock pins (A-to-B Clock or B-to-A Clock) regardless of

the select or enable or enable control pins. When A-to-B Source and

B-to-A Source are in the real-time transfer mode, it is also possible to

ORDERING INFORMATION

IN74HC651N Plastic

IN74HC651DW SOIC

TA = -55° to 125° C for all packages

store data without using the internal D-type flip-flops by simulta-

neously enabling Direction and Output Enable. In this configuration

each output reinforces its input. Thus, when all other data sources to the two sets of bus lines are at high

impedance, each set of bus lines will remain at its last state.

The IN74HC651 has inverted outputs.

PIN ASSIGNMENT

• Outputs Directly Interface to CMOS, NMOS, and TTL

• Operating Voltage Range: 2.0 to 6.0 V

• Low Input Current: 1.0 µA

• High Noise Immunity Characteristic of CMOS Devices

LOGIC DIAGRAM

PIN 24=VCC

PIN 12 = GND

456

Share Link: