LB1848M 查看數據表（PDF） - SANYO -> Panasonic

零件编号

产品描述 (功能)

比赛名单

LB1848M

Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver

SANYO -> Panasonic 

Block Diagrams

[LB1846M]

LB1846M, 1848M

[LB1848M]

Note: When the “soft off” function is used, a capacitor must be connected to the SOF pin. If this function is not used, this pin must be left open with absolutely

no signals or lines connected.

Notes on Wiring and Lines

Since large currents flow in the VCC and ground lines, oscillations may occur on these lines. The following points

should be observed if such oscillations occur.

(1) Lower the line impedances by making them shorter and thicker.

(2) Attach capacitors close to the IC.

(3) If the controller (CPU) is mounted on a separate printed circuit board, insert series resistors (of about 10 kΩ)

between the controller outputs and this IC.

No. 5339-3/6

Share Link: