DS2117M 查看數據表（PDF） - Maxim Integrated

零件编号

产品描述 (功能)

比赛名单

DS2117M

Ultra3 LVD/SE SCSI Terminator

Maxim Integrated 

DS2117M

PIN DESCRIPTION

PIN

NAME

1

VREF

2, 3

4–7, 11–16,

22–25, 29–32

8, 9, 10, 26,

27, 28

NC

RxP, RxN

HS GND

17

ISO

18

GND

19

MSTR/SLV

20

DIFFSENSE

21

DIFF_CAP

33

SE

34

LVD

35

HVD

36

TPWR

FUNCTION

Reference Voltage. 2.85V reference in SE mode and 1.25V reference in

LVD mode; must be decoupled with a 4.7µF capacitor.

No Connection. Do not connect these pins.

Signal Termination. Connect to SCSI bus signal lines.

Heat Sink Ground. Internally connected to the mounting pad. Should

be grounded.

Isolation. When pulled high, the DS2117M isolates its bus pins (RxP,

RxN) from the SCSI bus.

Ground. Signal ground, 0V.

Master/Slave. Mode select for the non-controlling terminator. When

pulled high (MSTR), the DIFFSENSE driver is enabled.

DIFFSENSE. Output to drive the SCSI bus DIFFSENS line.

DIFFSENSE Capacitor. Connect 0.1µF capacitor for DIFFSENSE

filter. Input to detect the type of device (differential or single-ended) on

the SCSI bus.

Single-Ended. SE output of DIFFSENSE receiver; output high

indicates SE bus operation.

Low-Voltage Differential. LVD output of DIFFSENSE receiver;

output high indicates LVD bus operation.

High-Voltage Differential. HVD output of DIFFSENSE receiver;

output high indicates HVD bus operation or thermal shutdown.

Termination Power. Connect to the SCSI TERMPWR line and

decouple with 2.2µF capacitor.

6 of 9

Share Link: