AN2078
How to use the IAP driver
To efficiently use the IAP driver, please follow the different steps below:
● Download the IAP driver into the STR7xx internal Flash via JTAG using a Flasher
toolset.
● Open an HyperTerminal Window with the settings already defined in Section 2.1
● To run the IAP driver, keep the push button (according to the used STR7xx Eval board)
pressed at Reset. The IAP main menu is then displayed on the HyperTerminal window.
● To download an application, press 1 and use the YMODEM protocol as described in
Section 3.1.
11/13