datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

P/N +描述+內容搜索

關鍵詞
Tyco Electronics -> TE Connectivity
Tyco Electronics -> TE Connectivity
产品描述 (功能) : Ergocrimp-DIE SET Ergocrimp Matrize

Ergocrimp-DIE SET Ergocrimp Matrize

Tyco Electronics
Tyco Electronics
产品描述 (功能) : Ergocrimp Die SET for Type XII and Type III+

Ergocrimp Die SET for Type XII and Type III+

零件编号(s) : SET-0901 SET-0902
Micro Electronics
Micro Electronics
产品描述 (功能) : SMD MODEM TRANSFORMER

FEATURES:
* SURFACE MOUNT
* LOW DISTORTION
* 7mm SEATED HEIGHT
* VACUUM ENCAPSULATED
* REINFORCED ISOLATION

APPLICATIONS:
* TELECOMMUNICATIONS
* MODES
* PORTABLE COMPUTERS
* FAX / MODEMS

产品描述 (功能) : SP6T UltraCMOS™ 2.70 V Switch 100 – 3000 MHz, 50 Ω

Product Description
The PE42632 is a HaRP™-enhanced SP6T RF Switch developed on the UltraCMOS™ process technology. This 50 Ω switch addresses the specific design needs of the Quad-Band GSM HandSET Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS control. High ESD tolerance of 1500 V at all ports, no blocking capacitor requirements and on-chip SAW filter over-voltage protection devices make this the ultimate in integration and ruggedness.

Features
• Three pin CMOS logic control with integral decoder/driver
• Low TX insertion loss: 0.55 dB at 900 MHz, 0.60 dB at 1900 MHz
• TX – RX Isolation of 38 dB at 900 MHz, 31 dB at 1900 MHz
• Low harmonics: 2fo = -90 dBc and 3fo = -82 dBc
• 1500 V HBM ESD tolerance all ports
• 41 dBm P1dB, TX paths
• No blocking capacitors required
• RoHS compliant lead-free solder balls

产品描述 (功能) : 100mA DUAL COMPLEMENTARY PRE-BIASED TRANSISTORS

General Description
DCX100NS is best suited for applications where the load needs to be turned on and off using control circuits like micro-controllers, comparators etc. particularly at a point of load. It features a discrete PNP pass transistor which can support continuous maximum current up to 100 mA. It also contains an NPN transistor which can be used as a control switch and also it can be biased using higher supply. The component devices can be used as part of a circuit or as stand alone discrete devices.

Features
· Built in Biasing Resistors
· Epitaxial Planar Die Construction
· Lead Free By Design/ROHS Compliant (Note 1)
· "Green" Device (Note 2)
· Ideally Suited for Automated Assembly Processes

产品描述 (功能) : 75 BNC Cable Connector

75 BNC Cable Connector
   
• Reinforced guidance – minimizes tilting and
    provides contacts from deformation
• True 75 Ω design – exceeds the stringent HDTV requirements
• Superior return loss - ensures highest signal quality
• Shield and jacket crimping – no exposed copper braids
    and strong cable retention
• Gold plated “Snap-In” center Pin – provides a tactile feedback
    during assembly & avoids push back of center contacts
   

零件编号(s) : MAAPGM0029-DIE
Tyco Electronics
Tyco Electronics
产品描述 (功能) : Amplifier, Power, 1W 3.5-6.5 GHz

Description
The MAAPGM0029-Die is a 2-stage 1 W power amplifier with on-chip bias networks. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate (MSAG™) Process, each device is 100% RF tested on wafer to ensure performance compliance.

Features
♦ 1 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ Process

Primary Applications
♦ Wireless Local Loop
♦ 3.7- 4.2 GHz SatCom

零件编号(s) : MAAPGM0060-DIE
Tyco Electronics
Tyco Electronics
产品描述 (功能) : Amplifier, Power, 5W 4.8-6.7 GHz

Description
The MAAPGM0060-DIE is a 2-stage, 5 W power amplifier with on-chip bias networks. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications.
Each device is 100% RF tested on wafer to ensure performance compliance. The part is fabricated using M/A-COM’s repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate (MSAG) Process. This process provides polyimide scratch protection.

Features
♦ 5 Watt Saturated Output Power Level
♦ Variable Drain Voltage (6-10V) Operation
♦ MSAG Process

Primary Applications
♦ Point-to-Point Radio
♦ SatCom
♦ Broadband Wireless Access

零件编号(s) : MAPCGM0003-DIE
Tyco Electronics
Tyco Electronics
产品描述 (功能) : 2.3-4.1 GHz Phase Shifter

Description
The MAPCGM0003-Die is a 6-bit Phase Shifter with Parallel Input Control. This product is fully matched to 50 ohms on both the input and output. It can be used to obtain a phase shift of 5.6º to 354º Clockwise.
Fabricated using M/A-COM’s repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate MESFET Process, each device is 100% RF tested on wafer to ensure performance compliance.

Features
♦ 6 Bit Phase Shifter (0º ~ 354º, CW)
♦ TTL Control Inputs
♦ MSAG™ Process

Primary Applications
♦ Satellite Communication
♦ Phased Array Radar

零件编号(s) : MAAPGM0034-DIE
Tyco Electronics
Tyco Electronics
产品描述 (功能) : 0.5W X/Ku-Band Power Amplifier 8.0-12.5 GHz

Description
The MAAPGM0034-Die is a 2-stage 0.5 W power amplifier with on-chip bias networks. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications.
Each device is 100% RF tested on wafer to ensure performance compliance. The part is fabricated using M/A-COM’s repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate (MSAG®) MESFET Process. This process provides polyimide scratch protection.

Features
♦ 8.0-12.5 GHz Operation
♦ 0.5 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ Self-Aligned MSAG® MESFET Process

Primary Applications
♦ Point-to-Point Radio
♦ Weather Radar
♦ Military Radar

12345678910 Next

All Rights Reserved© datasheetbank.com [ 隐私政策 ]