datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

VS1003 查看數據表(PDF) - Unspecified

零件编号
产品描述 (功能)
比赛名单
VS1003
ETC
Unspecified ETC
VS1003 Datasheet PDF : 61 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
VS1003
6 CONNECTION DIAGRAM, LQFP-48
6 Connection Diagram, LQFP-48
Figure 7: Typical Connection Diagram Using LQFP-48.
The common buffer GBUF can be used for common voltage (1.24 V) for earphones. This will
eliminate the need for large isolation capacitors on line outputs, and thus the audio output pins
from VS1003 may be connected directly to the earphone connector.
GBUF must NOT be connected to ground under any circumstances. If GBUF is not used,
LEFT and RIGHT must be provided with coupling capacitors. To keep GBUF stable, you should
always have the resistor and capacitor even when GBUF is not used. See application notes for
details.
Unused GPIO pins should have a pull-down resistor.
If UART is not used, RX should be connected to IOVDD and TX be unconnected.
Do not connect any external load to XTALO.
Note: This connection assumes SM_SDINEW is active (see Chapter 8.6.1). If also SM_SDISHARE
is used, xDCS should be tied high (see Chapter 7.2.1).
Version: 1.09, 2018-03-16
15

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]