Model 5307 50 Ω Male BNC Connector and Assembly
Instructions
Figure #5
6. Assemble the cable into the connector
housing. Make sure that the center
contact goes through the hole in the
middle of the front insulator. Screw the
clamp nut into the connector housing and
torque at 18 to 22 in-lbs. (see Figure #5
for final assembly).
Sales:
800-490-2361
Fax:
888-403-3360
Technical Support:
800-241-2060
or e-mail us at
technicalsupport@pomonatest.com
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2005 07/2005 2391542 D-ENG-N Rev A Page 3 of 3