AD8196 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

比赛名单

AD8196

2:1 HDMI/DVI Switch with Equalization

Analog Devices 

AD8196

Preliminary Technical Data

Parameter

SERIAL CONTROL INTERFACE5

Input High Voltage, VIH

Input Low Voltage, VIL

Output High Voltage, VOH

Output Low Voltage, VOL

Conditions/Comments

Min

Typ Max

Unit

2

V

0.8

V

2.4

V

0.4

V

1 Differential interpair skew is measured between the TMDS pairs of a single link.

2 AD8196 output meets the transmitter eye diagram as defined in the DVI Standard Revision 1.0 and the HDMI Standard Revision 1.3.

3 Cable output meets the receiver eye diagram mask as defined in the DVI Standard Revision 1.0 and the HDMI Standard Revision 1.3.

4 Typical value assumes only the selected HDMI/DVI link is active with nominal signal swings and that the unselected HDMI/DVI link is deactivated. Minimum and

maximum limits are measured at the respective extremes of input termination resistance and input voltage swing.

5 The AD8196 is an I2C slave and its serial control interface is based on the 3.3 V I2C bus specification.

PrA | Page 4 of 24

Share Link: