IRHNA9064 查看數據表（PDF） - International Rectifier
零件编号
产品描述 (功能)
比赛名单
IRHNA9064 Datasheet PDF : 8 Pages
| |||
IRHNA9064
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min Typ Max Units
Test Conditions
BVDSS
Drain-to-Source Breakdown Voltage -60 — —
V
VGS = 0V, ID =-1.0mA
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — -0.055 — V/°C Reference to 25°C, ID = -1.0mA
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.045
— — 0.048 Ω
VGS = -12V, ID = -30A➃
VGS = -12V, ID = -48A➃
VGS(th)
gfs
Gate Threshold Voltage
Forward Transconductance
-2.0 — -4.0 V
18 — — S ( )
VDS = VGS, ID = -1.0mA
VDS >-15V, IDS = -30A ➃
IDSS
Zero Gate Voltage Drain Current
—
—
—
—
-25
-250
µA
VDS= -48V ,VGS=0V
VDS = -48V,
VGS = 0V, TJ = 125°C
IGSS
IGSS
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
— — -100
—
— 100 nA
VGS = -20V
VGS = 20V
Qg
Total Gate Charge
— — 300
VGS =-12V, ID = -48A
Qgs
Gate-to-Source Charge
— — 70 nC
VDS = -30V
Qgd
Gate-to-Drain (‘Miller’) Charge
— — 91
td(on)
Turn-On Delay Time
— — 35
VDD = -30V, ID = -48A,
tr
td(off)
Rise Time
Turn-Off Delay Time
— — 150
—
— 200 ns
VGS =-12V, RG = 2.35Ω
tf
Fall Time
— — 200
LS + LD
Total Inductance
—
4.0 —
nH Measured from drain lead (6mm/0.25in. from
package) to source lead (6mm/0.25in. from
package)
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 6700 —
— 2800 — pF
— 920 —
VGS = 0V, VDS = -25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
Continuous Source Current (Body Diode) — — -48 A
ISM Pulse Source Current (Body Diode) ➀
— — -192
Test Conditions
VSD Diode Forward Voltage
trr Reverse Recovery Time
QRR Reverse Recovery Charge
— — -3.0 V
Tj = 25°C, IS = -48A, VGS = 0V ➃
— — 270 nS Tj = 25°C, IF = -48A, di/dt ≤ -100A/µs
— — 2.5 µC
VDD ≤ -50V ➃
ton Forward Turn-On Time
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC board
Min Typ Max Units
Test Conditions
— — 0.42 °C/W
— 1.6 —
Soldered to a 1” square copper-clad board
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com
Share Link: 