IT1 查看數據表（PDF） - HIROSE ELECTRIC

零件编号

产品描述 (功能)

比赛名单

IT1

High Speed, Matched-Impedance, Parallel Board-to-board Connector

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHISTp1roSduectrsiehsav●e HbeiegnhdisScopnetineuded,, Morawtilcl bheeddis-cIomntipnueedd saononc.ePl,eaPsae rcahelclek lthBe opraordduc-ttsos-tabtousaorndthCe HoirnonseewcetbosirteSRyoHsStseemarch at www.hirose-connectors.com, or contact your Hirose sales representative.

3-5 Solder Repairs

Assure that flux is not reaching the contact areas of the connector.

Wash the assembly as recommended below.

SCleaning ConditionsS

<Organic Solvent Cleaning>

<Water Based Cleaning>

When using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the

documentation issued by the various manufacturers, which describes its effects on metals and resins. Care should be taken

not to leave moisture on the connectors.

<Cleaning Precautions>

Residual flux or cleaning agent remaining on the connectors when cleaning with organic solvents or water based cleaners

may cause deterioration of the electrical performance. It is important to check that a thorough washing has been performed.

A306

Share Link: