L6206Q 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

比赛名单

L6206Q

DMOS dual full bridge driver

STMicroelectronics 

L6206Q

Pin connection

Pin

Name

18

IN2B

19 PROGCLB

20

ENB

21 VBOOT

22, 23 OUT2B

26, 27 VSB

34, 35 VSA

38, 39

40

OUT2A

VCP

41

ENA

42 PROGCLA

Table 3. Pin description (continued)

Type

Function

Logic input Bridge B input 2

R pin

Bridge B overcurrent level programming. A resistor connected between

this pin and ground sets the programmable current limiting value for

bridge B. By connecting this pin to ground the maximum current is set.

This pin cannot be left unconnected.

Logic input

Bridge B enable. LOW logic level switches OFF all Power MOSFETs of

bridge B. If not used, it must be connected to +5 V.

Supply voltage

Bootstrap voltage needed for driving the upper Power MOSFETs of both

bridge A and bridge B.

Power output Bridge B output 2.

Power supply

Bridge B power supply voltage. It must be connected to the supply

voltage together with pin VSA.

Power supply

Bridge A power supply voltage. It must be connected to the supply

voltage together with pin VSB.

Power output Bridge A output 2.

Output

Charge pump oscillator output.

Logic input

Bridge A enable. LOW logic level switches OFF all Power MOSFETs of

bridge A. If not used, it must be connected to +5 V.

R pin

Bridge A overcurrent level programming. A resistor connected between

this pin and ground sets the programmable current limiting value for

bridge A. By connecting this pin to ground, the maximum current is set.

This pin cannot be left unconnected.

DocID022028 Rev 3

5/27

27

Share Link: