MASWSS0006 查看數據表（PDF） - M/A-COM Technology Solutions, Inc.
零件编号
产品描述 (功能)
比赛名单
MASWSS0006 Datasheet PDF : 3 Pages
| |||
MASWSS0006
GaAs SPDT 2.5 V High Power Switch
DC - 3.0 GHz
Features
• Low Voltage Operation: 2.5 V
• Excellent Harmonics: <-67 dBc at +34 dBm & 1.0
GHz
• Low Insertion Loss: 0.40 dB at 1.0 GHz
• High Isolation: 20 dB at 2.0 GHz
• SOT-26 Package
• 0.5 micron GaAs PHEMT Process
Description
M/A-COM’s MASWSS0006 is a GaAs PHEMT
MMIC single pole double throw (SPDT) high power
switch in a low cost SOT-26 package. The
MASWSS0006 is ideally suited for applications
where high power, low control voltage, low insertion
loss, high isolation, small size and low cost are re-
quired.
Typical applications are for GSM and DCS handset
systems that connect separate transmit and receive
functions to a common antenna, as well as other
related handset and general purpose applications.
This part can be used in all systems operating up to
3.0 GHz requiring high power at low control voltage.
Functional Schematic
PIN 1
Rev. V4
PIN 6
13090ppFF
RF1
GND
RF2
13090pFF
V1
RFC
13090ppFF
V2
Pin Configuration
Pin No.
Pin Name
1
RF1
2
GND
3
RF2
4
V2
5
RFC
6
V1
Description
RF Port 1
RF Ground
RF Port 2
Control 2
RF Common Port
Control 1
The MASWSS0006 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and reliabil-
ity.
Ordering Information1
Part Number
Package
MASWSS0006
Bulk Packaging
MASWSS0006TR
1000 piece reel
MASWSS0006TR-3000
3000 piece reel
MASWSS0006SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Input Power
(0.5 - 3.0 GHz, 2.5 V Control)
+38 dBm
Voltage
±8.5 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Truth Table 4,5
V1
V2
ANT– RF1 ANT - RF2
1
0
On
Off
0
1
Off
On
4. Differential voltage, V (state 1) - V (State 0), must be +2.5 V
minimum.
5. 0 = -5 V to 2.5 V, 1 = -2.5 V to +5 V.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 