PI74LPT543 查看數據表（PDF） - Pericom Semiconductor

零件编号

产品描述 (功能)

比赛名单

PI74LPT543

Fast CMOS 3.3V 8-Bit Latched Transceiver

Pericom Semiconductor 

PI74LPT543

1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001132233.34455V667788899-0011B2211I22T334455L6677A8899T0011C2233H445566E7788D990011T2233R4455A667788N9900S1122C1122E3344I55V6677E8899R001122

Power Supply Characteristics

Parameters Description

Test Conditions(1)

Min. Typ(2) Max. Units

ICC

Quiescent Power Supply Current VCC = Max.

VIN = GND or VCC

∆ICC

Quiescent Power Supply Current VCC = Max.

TTL Inputs HIGH

VIN = VCC – 0.6V(3)

ICCD

Dynamic Power Supply(4)

VCC = Max.,

Outputs Open

CEAB and

OEAB = GND

CEBA = VCC

One Bit Toggling

50% Duty Cycle

VIN = VCC

VIN = GND

0.1 10 µA

2.0 30 µA

50 75 µA/

MHz

IC

Total Power Supply

Current(6)

VCC = Max.,

Outputs Open

fI = 10 MHZ

50% Duty Cycle

CEAB and

OEAB = GND

CEBA = VCC

One Bit Toggling

VCC = Max.,

Outputs Open

fI = 2.5 MHZ

50% Duty Cycle

CEAB and

OEAB = GND

CEBA = VCC

8 Bits Toggling

VIN = VCC – 0.6V

VIN = GND

VIN = VCC – 0.6V

VIN = GND

0.6 2.3 mA

2.1 4.7(5)

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.

2. Typical values are at Vcc = 3.3V, +25°C ambient.

3. Per TTL driven input; all other inputs at Vcc or GND.

4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.

5. Values for these conditions are examples of the Icc formula. These limits are guaranteed but not tested.

6. IC =IQUIESCENT + IINPUTS + IDYNAMIC

IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fINI)

ICC = Quiescent Current (ICCL, ICCH and ICCZ)

∆ICC = Power Supply Current for a TTL High Input

DH = Duty Cycle for TTL Inputs High

NT = Number of TTL Inputs at DH

ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)

fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)

NCP = Number of Clock Inputs at fCP

fI = Input Frequency

NI = Number of Inputs at fI

All currents are in milliamps and all frequencies are in megahertz.

4

PS2062A 01/15/97

Share Link: