PMB2304 查看數據表（PDF） - Infineon Technologies

零件编号

产品描述 (功能)

比赛名单

PMB2304

Wireless Components PLL-Frequency Synthesizer

Infineon Technologies 

PMB 2304R

preliminary

Functional Description

8 NC

9 NC

10 FI

STDBY

11

VSS1

P in 1 0

FI

560Ω

2pF

ESD

STDBY

500KΩ

12 PD

pin 12

*2pF

PD

ESD

* O nly this pin has lim ited build-in ESD

protection

13

VDD1

not connected

not connected

VCO-Frequency

Input with highly sensitive preamplifier for

14-bit N-counter and 7-bit A-counter. With

small input signals AC coupling must be

set up, where DC coupling can be used

for large input signals.

Ground for the preamplifiers, counters,

phase detector and charge pump.

(Note: The pins VDD and VDD1 respec-

tively VSS and VSS1 have to have the

same supply voltage.)

Phase Detector

Tristate charge pump output. The inte-

grated, positive and negative current

sources can be programmed with respect

to their current density by means of the

serial control. Activation and deactivation

depend on the phase relationship of the

scaled-down input signals FI:N, RI:R.

(See phase detector output waveforms.)

frequencyfV < fR or fV lagging:p-channel

current source active

frequencyfV > fR or fR leading:n-channel

current source active

frequencyfV = fR and PLL locked:current

sources are switched off,

PD-output is tristate

In standby mode the PD-output is set to

tristate. The assignment of the current

sources to the output signals of the phase

detector can be swapped in it’s polarity,

i.e. the sign of the phase detector con-

stant can be controlled.

Positive supply voltage for the preamplifi-

ers, counters, phase detector and charge

pump.

Wireless Components

3-4

Specification, June 2002

Share Link: