SAA7130 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

比赛名单

SAA7130

PCI video broadcast decoder

Philips Electronics 

Philips Semiconductors

SAA7130HL

PCI video broadcast decoder

2. Features

2.1 PCI and DMA bus mastering

s PCI 2.2 compliant including full Advanced Configuration and Power Interface (ACPI)

s System vendor ID, etc. via EEPROM

s Hardware support for virtual addressing by MMU

s DMA bus master write for video, VBI and TS

s Configurable PCI FIFOs, graceful overflow

s Packed and planar video formats, overlay clipping

2.2 TV video decoder and video scaling

s All-standards TV decoder: NTSC, PAL and SECAM

s Five analog video inputs: CVBS and S-video

s Video digitizing by two 9-bit ADCs at 27 MHz

s Sampling according ITU-R BT.601 with 720 pixels/line

s Adaptive comb filter for NTSC and PAL, also operating for non-standard signals

s Automatic TV standard detection

s Three level Macrovision copy protection detection according to Macrovision detect

specification revision 1

s Control of brightness, contrast, saturation and hue

s Versatile filter bandwidth selection

s Horizontal and vertical downscaling or zoom

s Adaptive anti-alias filtering

s Capture of raw VBI samples

s Two alternating settings for active video scaling

s Output in YUV and RGB

s Gamma compensation, black stretching

2.3 TV audio I/O

s Integrated analog audio pass-through for analog audio loopback cable to sound card

2.4 Peripheral interface

s I2C-bus master interface: 3.3 V and 5 V

s Digital video output: ITU and VIP formats

s TS input: serial or parallel

s General purpose I/O, e.g. for strapping and interrupt

s Propagate reset and ACPI state D3-hot

2.5 General

s Package: LQFP128

s Power supply: 3.3 V only

s Power consumption of typical application: 1 W

s Standby state (D3-hot): < 0.02 W

SAA7130HL_4

Product data sheet

Rev. 04 — 11 April 2006

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

4 of 46

Share Link: