XC886/888CLM
Functional Description
Note: The RMAP bit must be cleared/set by ANL or ORL instructions. The rest bits of
SYSCON0 should not be modified.
As long as bit RMAP is set, the mapped SFR area can be accessed. This bit is not
cleared automatically by hardware. Thus, before standard/mapped registers are
accessed, bit RMAP must be cleared/set, respectively, by software.
Standard Area (RMAP = 0)
FFH
Module 1 SFRs
SYSCON0.RMAP
rw
Module 2 SFRs
SFR Data
(to/from CPU)
Module n SFRs
80H
Mapped Area (RMAP = 1)
FFH
Module (n+1) SFRs
Module (n+2) SFRs
Module m SFRs
Figure 8 Address Extension by Mapping
80H
Direct
Internal Data
Memory Address
Data Sheet
Prelimary
22
V0.1, 2006-02