TB6674FAG 查看數據表（PDF） - Toshiba

零件编号

产品描述 (功能)

比赛名单

TB6674FAG

BiCD Integrated Circuit Silicon Monolithic

Toshiba 

TB6674PG/FG/FAG

Over Current Protection (ISD) Circuit

The IC incorporates the over current protection circuit that monitors the current flowing through each

output power transistor. If a current, which is out of the detecting current, is sensed at any one of these

transistors, all output transistors are turned off (Hi-Z). (However, ISD is not incorporated in upper

PchDMOS when PS is high level (Vs2A is 5 V usage) because ON resistance is large.

Masking time is 20 μs. The operation does not recover automatically (latch method). There are two

recovery methods written below.

(1) Power monitor turns on when any of the power supply decreases and reaches the specified voltage.

(2) Vs2B is set low level for 20 μs or more and then set high. The operation recovers in 10 μs.

Reference design target of detecting current is as follows;

PS = L, VS1A (12 V) :PchDMOS = 1.1 A

PS = H/PS = L in common :Lower NchDMOS = 1.4 A

Please reduce the external noise to prevent malfunction for ISD.

<ISD operation>

ISD detecting value

Output current

0

H

ISD internal signal

L

Operation recovers by

one of two cases.

Vs2B

UVLO (Power monitor)

20 μs

(Design target)

OFF time

20 μs

(Design target)

10 μs

(Design target)

Power monitoring: ON

Power monitoring: OFF

Power monitoring: ON

Output terminal

Normal operation

OFF（Hi-Z）

8

Ver.3 2010-07-07

Share Link: