WM8591 查看數據表（PDF） - Wolfson Microelectronics plc

零件编号

产品描述 (功能)

比赛名单

WM8591

24-bit, 192kHz Stereo CODEC

Wolfson Microelectronics plc 

WM8591

Production Data

TERMINOLOGY

1. Signal-to-noise ratio (dB) – SNR is a measure of the difference in level between the full scale output and the output

with no signal applied. (No Auto-zero or Automute function is employed in achieving these results).

2. Dynamic range (dB) – DNR is a measure of the difference between the highest and lowest portions of a signal.

Normally a THD+N measurement at 60dB below full scale. The measured signal is then corrected by adding the 60dB

to it. (e.g. THD+N @ -60dB= -32dB, DR= 92dB).

3. THD (dB) – THD is a ratio, of the rms values, of Distortion/Signal.

4. Stop band attenuation (dB) – Is the degree to which the frequency spectrum is attenuated (outside audio band).

5. Channel Separation (dB) – Also known as Cross-Talk. This is a measure of the amount one channel is isolated from

the other. Normally measured by sending a full scale signal down one channel and measuring the other.

6. Pass-Band Ripple – Any variation of the frequency response in the pass-band region.

w

PD Rev 4.0 December 2005

8

Share Link: