ADG801BRT 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
比赛名单
ADG801BRT Datasheet PDF : 9 Pages
| |||
PRELIMINARY TECHNICAL DATA
ADG801/ADG802
TERMINOLOGY
VDD
IDD
GND
Most positive power supply potential.
Positive supply current.
Ground (0 V) reference.
S
Source terminal. May be an input or output.
D
Drain terminal. May be an input or output.
IN
Logic control input.
VD (VS)
RON
RFLAT(ON)
Analog voltage on terminals D, S
Ohmic resistance between D and S.
Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured
over the specified analog signal range.
IS (OFF)
ID (OFF)
ID, IS (ON)
VINL
VINH
IINL(IINH)
CS (OFF)
CD (OFF)
CD,CS(ON)
CIN
tON
tOFF
Source leakage current with the switch “OFF.”
Drain leakage current with the switch “OFF.”
Channel leakage current with the switch “ON.”
Maximum input voltage for logic “0”.
Minimum input voltage for logic “1”.
Input current of the digital input.
“OFF” switch source capacitance. Measured with reference to ground.
“OFF” switch drain capacitance. Measured with reference to ground.
“ON” switch capacitance. Measured with reference to ground.
Digital input capacitance.
Delay between applying the digital control input and the output switching on. See Test Circuit 4.
Delay between applying the digital control input and the output switching off.
Charge
Injection
A measure of the glitch impulse transferred from the digital input to the analog output during switching.
Off Isolation A measure of unwanted signal coupling through an “OFF” switch.
Crosstalk
A measure of unwanted signal which is coupled through from one channel to another as a result of parasitic
capacitance.
Bandwidth The frequency at which the output is attenuated by 3dBs.
On Response The Frequency response of the “ON” switch.
Insertion
Loss
The loss due to the ON resistance of the switch.
REV. PrE
–5–
Share Link: 