RP102N331D-TR 查看數據表（PDF） - RICOH Co.,Ltd.
零件编号
产品描述 (功能)
比赛名单
RP102N331D-TR Datasheet PDF : 30 Pages
| |||
RP102x SERIES
LOW NOISE 300mA LDO REGULATOR
NO.EA-141-160705
OUTLINE
The RP102x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, a resistor-net for voltage setting, a current limit circuit and a chip enable circuit.
These ICs perform with low dropout voltage and "chip enable" function. The line transient response and load
transient response of the RP102x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5,
DFN(PLP)1820-6, and WLCSP-4-P2, therefore high density mounting of the ICs on boards is possible.
FEATURES
Supply Current ...................................................... Typ. 50A
Standby Mode ....................................................... Typ. 0.1A
Dropout Voltage .................................................... Typ. 0.12V (IOUT300mA, VOUT2.8V)
Ripple Rejection .................................................... Typ. 80dB (f1kHz)
Temperature-Drift Coefficient of Output Voltage ... Typ. ±20ppm/C
Line Regulation ..................................................... Typ. 0.02%/V
Output Voltage Accuracy.......................................0.8%
Packages .............................................................. WLCSP-4-P2, DFN(PLP)1820-6, SOT-23-5
Input Voltage Range ............................................. 1.7V to 5.25V
Output Voltage Range...........................................1.2V to 3.3V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
Built-in Fold Back Protection Circuit ..................... Typ. 50mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC ......CINCOUT1F or more
APPLICATIONS
Power source for portable communication equipment.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.
1
Share Link: 