PRODUCT OVERVIEW
INTRODUCTION
This manual describes SAMSUNG's S3C2410A 16/32-bit RISC microprocessor. This product is designed to provide hand-held devices and general applications with cost-effective, low-power, and high-performance micro-controller solution in small die size. To reduce total system cost, the S3C2410A includes the following components separate 16KB Instruction and 16KB Data Cache, MMU to handle virtual memory management, LCD Controller (STN & TFT), NAND Flash Boot Loader, System Manager (chip select logic and SDRAM Controller), 3-ch UART, 4-ch DMA, 4-ch
Timers with PWM, I/O Ports, RTC, 8-ch 10-bit ADC and Touch Screen Interface, IIC-BUS Interface, IIS-BUS Interface, USB Host, USB Device, SD Host & Multi-Media Card Interface, 2-ch SPI and PLL for clock generation.
The S3C2410A was developed using an ARM920T core, 0.18um CMOS standard cells and a memory complier. Its low-power, simple, elegant and fully static design is particularly suitable for cost- and power-sensitive applications. It adopts a new bus architecture called Advanced Microcontroller Bus Architecture (AMBA).

·  1.8V/2.0V int.,3.3V memory, 3.3V external I/O microprocessor with 16KB I-Cache/16KB D-Cache/MMU
·  External memory controller (SDRAM Control and Chip Select logic)
·  LCD controller (up to 4K color STN and 256K color TFT) with 1-ch LCD-dedicated DMA
·  4-ch DMAs with external request pins
·  3-ch UART (IrDA1.0, 16-Byte Tx FIFO, and 16-Byte Rx FIFO) / 2-ch SPI
·  1-ch multi-master IIC-BUS/1-ch IIS-BUS controller
·  SD Host interface version 1.0 & Multi-Media Card Protocol version 2.11 compatible
·  2-port USB Host /1- port USB Device (ver 1.1)
·  4-ch PWM timers & 1-ch internal timer
·  Watch Dog Timer
·  117-bit general purpose I/O ports / 24-ch external interrupt source
·  Power control: Normal, Slow, Idle and Power-off mode
·  8-ch 10-bit ADC and Touch screen interface
·  RTC with calendar function
·  On-chip clock generator with PLL