These Intersil RS-485, RS-422 devices are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive devices, this Intersil family is specified for 10% tolerance supplies (4.5V to 5.5V).
The ISL8483E utilizes slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or un-terminated stubs in multidrop and multipoint applications.

FEATUREs
• Pb-Free Available (RoHS Compliant)
• Military and Extended Industrial Temperature Options (+125°C)
• RS-485 I/O Pin ESD Protection . . . . . . . . . . . . . ±15kV HBM
   - Class 3 ESD Level on all Other Pins . . . . . . >7kV HBM
• Specified for 10% Tolerance Supplies
• High Data Rate Version (ISL8485E) . . . . . up to 10Mbps
• Slew Rate Limited Version for Error Free Data
   Transmission (ISL8483E) . . . . . . . . . . . . . up to 250kbps
• Single Unit Load Allows up to 32 Devices on the Bus
• 1nA Low Current Shutdown Mode (ISL8483E)
• Low Quiescent Current:
   - 160µA (ISL8483E)
   - 500µA (ISL8485E)
• -7V to +12V Common Mode Input Voltage Range
• Three State Rx and Tx Outputs
• 30ns Propagation Delays, 5ns Skew (ISL8485E)
• Operate from a Single +5V Supply (10% Tolerance)
• Current Limiting and Thermal Shutdown for driver Overload Protection

APPLICATIONs
• Factory Automation
• Security Networks
• Building Environmental Control Systems
• Industrial/Process Control Networks
• Level Translators (e.g., RS-232 to RS-422)
• RS-232 “Extension Cords”