[Ample Communications]
Overview
The Skyhawk is a highly integrated, ultra-low-power frame processing solution for 10 Gigabit Ethernet (10 GbE) physical layer applications. The device provides complete PCS-R, PCS-W, and WIS functionality and can operate as a 10 GbE LAN or WAN PHY.
FEATUREs
WIS Layer Processing
• Support for all WIS framing and frame synchronization functions
• Complete section, line, and path overhead layer termination
• Generation and verification of BIP-8 parity
• Pointer processing for receive payload extraction and transmit payload mapping
• Extraction and insertion of transport and path overhead from/to dedicated external pins or from registers
• WIS alarm insertion and detection
• Frame-synchronous X7 + X6 + 1 scrambling and descrambling
• Error rate monitoring
10 GbE Processing
• 10 GbE WAN and LAN PHY functionality
• Complete PCS-R and PCS-W functionality including:
• 64b/66b encoding and decoding
• X58 + X39 + 1 scrambling and descrambling
• 66:16 gearboxing
• Block synchronization
• Rate matching
• Block_lock detection
• Remote and local fault handling
Line-Side Interface
• Support for two configurations
• Standard XSBI (SFI-4) 16-bit, 622.08 MHz, LVDS interface for 10 GbE WAN PHY mode
• Standard XSBI 16-bit, 644.53 MHz, LVDS interface for 10 GbE LAN PHY mode
System-Side Interfaces
• Selectable XGMII interface: HSTL2 or SSTL
CPU Interface
• 32-bit synchronous CPU interface; support for both Intel and Motorola-type processors
• MDIO and MDC management interface and registers
Test and Diagnostic Support
• Built-in pattern generators and verifiers
• Multiple diagnostic loopbacks
• IEEE 1149.1 port with memory BIST, scan, and JTAG boundary scan
General Specifications
• Packaging: 672-pin flip-chip BGA
• Technology: low-power CMOS 1.8V, 3.3V-tolerant I/Os on CPU and other interfaces
• Ambient operating temperature: 0°C to 70°C
• Power dissipation: 3.5 W max, 2.7 W typical
Standards Compliance
• IEEE 802.3ae-D3.1 draft specification
• ANSI T1.416 – 1999
APPLICATIONs
• 10 GbE LAN or WAN switching equipment
• 10 GbE WAN or LAN PHYs
• Ethernet line-terminating equipment (ELTE)
• Edge and core routers
• Multiservice switches
• Uplink cards
• 10 GbE test equipment