Description
The APDS-9301 is Light-to-Digital Ambient Light Photo Sensor that converts light intensity to digital signal output capable of direct I2C interface. Each device consists of one broadband photodiode (visible plus infrared) and one infrared photodiode. Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human-eye response.
FEATUREs
• Approximate the human-eye response
• Precise Illuminance measurement under diverse lighting conditions
• Programmable Interrupt Function with User-Defined
Upper and Lower Threshold Settings
• 16-Bit Digital Output with I2C Fast-Mode at 400 kHz
• Programmable Analog Gain and Integration Time
• Miniature ChipLED Package
– Height – 0.55mm
– Length – 2.60mm
– Width – 2.20mm
• 50/60-Hz Lighting Ripple Rejection
• Typical 3.0V Input Voltage
• Low Active Power (0.6 mW Typical) with Power Down
Mode
• RoHS Compliant
APPLICATIONs
• Detection of ambient light to control display
backlighting
– Mobile devices – Cell phones, PDAs, PMP
– Computing devices – Notebooks, Tablet PC, Key
board
– Consumer devices – LCD Monitor, Flat-panel TVs,
Video Cameras, Digital Still Camera
• Automatic Residential and Commercial Lighting
Management
• Automotive instrumentation clusters
• Electronic Signs and Signals