POWER PhotoMOS RELAYS(Voltage Sensitive Type)

FEATURES
1. A voltage sensitive power PhotoMOS relay
Conventional power PhotoMOS relays are connected externally to an input limiting resistor in order to obtain the appropriate LED current. Adding an internal constant-current element renders the in put limiting resistor unnecessary, making it possible for the PhotoMOS relay to be voltage driven.
2. Wide range of input voltages
Allows a wide range of input voltages from 4 to 30 V DC. The relay can be used in 5V, 12 V or 24 V DC systems.
3. Large capacity PhotoMOS relay
Supports the various types of load control, from very small loads to a maximum 2.7 A for the AC/DC dual type, 3.6 A for the DC-only type.
4. Both AC/DC dual types and DC-only types are available
The AC/DC dual type is capable of bi-directional control, and unlike conventional SSRs, does not have to be used different ly depending on the load. The DC-only type is well suited for control of DC solenoids and DC motors.
5. High sensitivity, low ON resistance
A maximum 3.6 A load can be controlled with the minimum input voltage of 4 V DC. The ON resistance is also low at 0.09 Ω (AQZ102D).
6. Small scale, slim type, 4-pin SIL
Length 21.0 mm×width 3.5 mm×height 12.5 mm. High precision mounting is pos sible because of the small 73.5mm2 area of the 4-pin SIL.