Slim and high capacity up to 3.6A Voltage-driven type
Power 1 Form A Voltage-sensitive

FEATURES
1. A voltage-sensitive power PhotoMOS
   Conventional power PhotoMOS are
   connected externally to an input limiting
   resistor in order to obtain the appropriate
   LED current. Adding an internal constant
   current element renders the input limiting
   resistor unnecessary, making it possible
   for the PhotoMOS to be voltage-driven.
2. Wide range of input voltages
   Allows a wide range of input voltages
   from 4 to 30 V DC. The PhotoMOS can
   be used in 5 V, 12 V or 24 V DC systems.
3. Both AC/DC dual types and DC-only types available
   The AC/DC dual type is capable of bidirectional control, and unlike
   conventional SSRs, does not have to be
   used differently depending on the load.
   The DC-only type is well suited for control
   of DC solenoids and DC motors.
4. High capacity
   Supports the various types of load
   control, from very small loads to a max.
   2.7 A for the AC/DC dual type, max. 3.6 A
   for the DC-only type.
5. High sensitivity and low on-resistance
   Max. 3.6 A load can be controlled with
   the min. input voltage of 4 V DC. The on
   resistance is also low at Typ. 0.033 Ω
(AQZ102D).
6. Slim SIL4-pin package
   (W) 3.5 × (D) 21.0 × (H) 12.5 mm
   (W) .138 × (D) .827 × (H) .492 inch
   The compact size of the 4-pin SIL
   package allows high density mounting.

TYPICAL APPLICATIONS
• Industrial machines
• Traffic signals