The ATS632LSA gear-tooth sensor is an optimized Hall-effect IC/magnet combination that provides extremely accurate tooth edge detection when used with large-pitch targets. The sensor subassembly consists of a high-temperature plastic shell that holds together a compound samarium-cobalt magnet and a single-element self-calibrating Hall-effect IC that has been optimized to the magnetic circuit. This small package, with its non-oriented operation, can be easily as sembled on a PC board for complete protection and used in conjunction with a number of gear configurations.
FEATURES AND BENEFITS
■ Non-Oriented Installation
■ Fully Optimized Gear-Tooth Sensors
■ Zero-Speed Digital Output Representing Target Profile
■ Large Operating Air Gaps
■ Extremely Low Timing Accuracy Drift with Temperature
■ Correct First-Edge Detection
■ Self-Calibrating Circuitry with Integrated Offset Cancellation 6-bit A/D Converters to Capture Peaks Thresholds Proportional to Peak-to-Peak Signals
■ Optimized Magnetic Circuit
■ Single-Chip Sensing IC for High Reliability
Supply Voltage, VCC .........................24 V*
Reverse Supply Voltage, VRCC ........ -24 V
Output OFF Voltage, VOUT................. 25 V
Output Current, IOUT .. Internally Limited
Reverse Output Current, IOUT ........ 50 mA
Package Power Dissipation,PD .................................... See Graph
Operating Temperature Range,TA ............................ -40°C to +150°C