General Description
The DS2482-100 is an I2C-to-1-Wire® bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform bidirectional protocol conversion between the I2C master and any downstream 1-Wire slave devices. Relative to any attached 1-Wire slave device, the DS2482-100 is a 1-Wire master. Internal, factory-trimmed timers relieve the system host processor from generating time-critical 1-Wire waveforms, supporting both standard and overdrive 1-Wire communication speeds.
Benefits and Features
• Allows Easy Interface Between a I2C Microport and a 1-Wire Slave
• I2C Host Interface Supports 100kHz and 400kHz I2C Communication Speeds
• 1-Wire Master IO with Selectable Active or Passive 1-Wire Pullup
• Provides Reset/Presence, 8-Bit, Single-Bit, and 3-Bit 1-Wire IO Sequences
• Standard and Overdrive 1-Wire Communication Speeds
• Two Address Inputs for I2C Address Assignment
• Minimizes Line Noise Reducing System EMI
• Slew-Controlled 1-Wire Edges
• Supports EEPROMs, Temperature Sensors, or Other 1-Wire Slaves That Have Momentary High Source Current Modes
• Strong 1-Wire Pullup Provided by an Internal LowImpedance Signal Path
• PCTLZ Output to Optionally Control an External MOSFET for Stronger Pullup Requirements
• Operating Range: 2.9V to 5.5V, -40°C to +85°C
• 8-Pin (150 mils) SO and 9-Bump WLP Packages
APPLICATIONs
Printers
Medical Instruments
Industrial Sensors
Cell Phones, PDAs