datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF
HOME  >>>  Intersil  >>> HIP0084 PDF

HIP0084 数据手册 ( 数据表 ) - Intersil

HIP0082 image

零件编号
HIP0084

Other PDF
  no available.

PDF
DOWNLOAD     

page
12 Pages

File Size
90.3 kB

生产厂家
Intersil
Intersil Intersil

Description
The HIP0082 and HIP0084 Quad Power Drivers contain four individually protected NDMOS transistor switches to drive inductive and resistive loads such as: fuel injectors, relays, solenoids, etc. The outputs are low-side switches driven by active-low CMOS logic inputs. Each output is protected against excessive current due to a short-circuit. Internal drain-to-gate zener diodes provide output clamping for over voltage. An integrated charge pump allows operation from a single 5V logic supply. Diagnostic circuits provide ground short (SG), supply short (SC) and open load (OL) detection for each of the four output stages and indicate over temperature. Diagnostic information may be read via a synchronous serial interface. Six bits of write/store data sets a long or short OL fault delay time for each output and sets Outputs 3 and 4 to a 2A or 5A current shutdown threshold. The HIP0084 is specified with controlled slew rate switching.
Both types are fabricated in a Power BiMOS IC process and are intended for use in automotive and other applications with a wide range of temperature and electrical stress. They are particularly suited for driving high-current inductive loads requiring high breakdown voltage and high output current. Both types available in the 15 lead Power SIP or 20 lead PSOP packages with low thermal resistance for high power applications.


FEATUREs
• Low Side Power MOSFET Output Drivers
   - Output Voltage Clamp (Typ) . . . . . . . . . . . . . . . . 80V
   - Maximum Output Current . . . . . . . . . . . . . . . . 5A/2A
   - Output rDS(ON) (TJ = 150°C) (Max) . . . . .0.57Ω/0.62Ω
• Controlled Slew Rate Switching (HIP0084)
• Single Pulse Energy Rating . . . . . . . . . . . . . . . . . 70mJ
• Programmable Output Over Current Shutdown Threshold
   - Bit Select 2A or 5A on Outputs 3 and 4
• Output Protection
   - Output Over Current Shutdown
   - Output Over Voltage Clamp
   - Over Temperature Diagnostic Feedback
• Diagnostics for Shorts, Opens and Over Temperature
• Synchronous Serial Interface with
   - 22-Bit Serial Diagnostic Register
   - SPI Compatible Interface
• Single 5V Supply Operation with CMOS Logic Inputs
• Supply Current, ICC, Full Load (Typ) . . . . . . . . . <10mA
• Low θJC Power SIP Packages
   SIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3°C/W
   PSOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2°C/W
• -40°C to 125°C Operating Temperature


APPLICATIONs
• Drivers For
   - Solenoids
   - Injectors
   - Relays
   - Steppers
   - Power Output
   - Motors
   - Lamps
   - Displays
• System Use
   - Automotive
   - Appliances
   - Industrial
   - Robotics

Page Link's: 1  2  3  4  5  6  7  8  9  10  More Pages 

零件编号
产品描述 (功能)
PDF
生产厂家
Quad Inverting Power Drivers with Serial Diagnostic Interface
Intersil
Quad Inverting Power Drivers with Serial Diagnostic Interface ( Rev : 1998 )
Intersil
Quad-Gated Inverting Power Drivers with Fault Mode Diagnostic Flag Output
Intersil
PROTECTED QUAD POWER DRIVERS
Allegro MicroSystems
Low-Power, Quad, 12-Bit Voltage-Output DAC with Serial Interface
Maxim Integrated
Low-Power, Quad, 12-Bit Voltage-Output DACs with Serial Interface
Maxim Integrated
Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial Interface ( Rev : 1996 )
Maxim Integrated
Low-Power, Quad, 12-Bit Voltage-Output DACs with Serial Interface ( Rev : 2008 )
Maxim Integrated
Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial Interface
Maxim Integrated
USB device with serial interface
Philips Electronics

Share Link: GO URL

EnglishEnglish Korean한국어 Chinese简体中文 Japanese日本語 Spanishespañol

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]