General Description
The Supertex HV823 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0V to 9.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±90V. The chip can be enabled by connecting the resistors on the RSW-Osc pin and
the REL-Osc pin to the VDD pin, and disabled when connected to GND.

FEATUREs
►Processed with HVCMOS® technology
►2.0 to 9.5V operating supply voltage
►DC to AC conversion
►180V peak-to-peak typical output voltage
►Large output load capability typically 50nF
►Permits the use of high-resistance elastomeric lamp components
►Adjustable output lamp frequency to control lamp color, lamp life, and power consumption
►Adjustable converter frequency to eliminate harmonics and optimize power consumption
►Enable/disable function
►Low current draw under no load condition

APPLICATIONs
►Handheld personal computers
►Electronic personal organizers
►GPS units
►Pagers
►Cellular phones
►Portable instrumentation