DESCRIPTION
The IP1M10 and IP1M12 series each contain two full H-bridge power drivers capable of delivering 200 mA continuous output current per channel (100mA for 1Mxx / 2Mxx). Each bridge may be run from its own supply voltage of up to 36V and is controlled by 2 high voltage protected logic level inputs with internal hysteresis for noise immunity. Protection features include thermal shutdown, peak current limiting, crossover current blanking, and internal output clamp diodes. Logic supply current is provided by a separate pin so that standby power dissipation may be minimised.
The IP1M10 series requires a +5V logic supply while the IP1M12 series requires a logic supply voltage of +7V or greater, and is typically used in single supply applications.
FEATURES
• 200mA Continuous output current per bridge(100mA for IP1Mxx, IP2Mxx)
• Internal output clamp diodes
• Hysteretic logic inputs for noise immunity
• Thermal shutdown protection
• Peak current limit protection
• Crossover current blanking
• Separate +5V logic supply for minimum power dissipation (1M10 series only)
• Separate +7V to +36V logic supply (1M12 series only)