Based on Motorola’s market-leading flash technology, members of the MC9S12C-Family deliver the power and flexibility of our 16 Bit core (CPU12) family to a whole new range of cost and space sensitive, general purpose Industrial and Automotive network applications. MC9S12C-Family members are comprised of standard on-chip peripherals including a 16-bit central processing unit (CPU12), up to 128K bytes of Flash EEPROM or ROM, up to 4K bytes of RAM, an asynchronous serial communications in terface (SCI), a serial peripheral interface (SPI), an 8-channel 16-bit timer module (TIM), a 6-channel 8-bit Pulse Width Modulator (PWM), an 8-channel, 10-bit analog-to-digital converter (ADC) and up to one CAN 2.0 A, B software compatible module (MSCAN12).

FEATUREs
• 16-bit HCS12 CORE
   — HCS12 CPU
   — MMC (memory map and interface)
   — INT (interrupt control)
   — BDM (background debug mode)
   — DBG12 (enhanced debug12 module including breakpoints and change-of-flow trace buffer)
   — Multiplexed Expansion Bus (available only in 80 pin package version)
• 16-bit HCS12 CPU
   — Upward compatible with M68HC11 instruction set
   — Interrupt stacking and programmer’s model identical to M68HC11
   — Instruction queue
   — Enhanced indexed addressing
• Wake-up interrupt inputs
   — Up to 10-port bits available for wake up interrupt function
• Memory options
   — 16K, 32K, 64K, 96K and 128K Byte Flash EEPROM (erasable in 512-byte sectors) or
   — 16K, 32K, 64K, 96K and 128K Byte ROM
   — 2K and 4K Byte RAM
• Analog-to-Digital Converters
   — One 8-channel module with 10-bit resolution.
   — External conversion trigger capability
• Up to one 1M bit per second, CAN 2.0 A, B software compatible modules
   — Five receive and three transmit buffers
   — Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8 x 8 bit
   — Four separate interrupt channels for receive, transmit, error and wake-up
   — Low-pass filter wake-up function
   — Loop-back for self test operation
• Timer Module (TIM)
   — 16-bit Counter with 7-bit Prescaler
   — 8 programmable input capture or output compare channels
   — Simple PWM Mode
   — Modulo Reset of Timer Counter
   — 16-Bit Pulse Accumulator
   — External Event Counting
   — Gated Time Accumulation
• 6 PWM channels
   — Programmable period and duty cycle
   — 8-bit 6-channel or 16-bit 3-channel
   — Separate control for each pulse width and duty cycle
   — Center-aligned or left-aligned outputs
   — Programmable clock select logic with a wide range of frequencies
   — Fast emergency shutdown input
• Serial interfaces
   — One asynchronous serial communications interface (SCI)
   — One synchronous serial peripheral interface (SPI)
• CRG (Clock Reset Generator Module)
   — Windowed COP watchdog,
   — Real time interrupt,
   — Clock monitor,
   — Clock generation
   — Reset Generation
   — Phase-locked loop clock frequency multiplier
   — Limp home mode in absence of external clock
   — Low power 0.5 to 16 MHz crystal oscillator reference clock
• Operation frequency
   — 32MHz equivalent to 16MHz Bus Speed for single chip
   — 32MHz equivalent to 16MHz Bus Speed in expanded bus modes
   — Option: 50MHz equivalent to 25MHz Bus Speed
• Internal 2.5V Regulator
   — Supports an input voltage range from 3.3V-10% to 5.5V
   — Low power mode capability
   — Includes low voltage reset (LVR) circuitry
   — Includes low voltage interrupt (LVI) circuitry
• 48-Pin LQFP, 52-Pin LQFP or 80-Pin QFP package
   — Up to 58 I/O lines with 5V input and drive capability
   — Up to 2 dedicated 5V input only lines (IRQ, XIRQ)
   — 5V A/D converter inputs and 5V I/O
• Development support
   — Single-wire background debug™ mode (BDM)
   — On-chip hardware breakpoints
   — Enhanced DBG12 debug features