GENERAL DESCRIPTION
The MX29F001T/B is a 1-mega bit Flash memory organized as 128K bytes of 8 bits only MXICs Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F001T/B is packaged in 32-pin PLCC, TSOP, PDIP. It is designed to be reprogrammed and erased in-system or in-standard EPROM programmers.
FEATURES
• 5.0V ± 10% for read, erase and write operation
• 131072x8 only organization
• Fast access time: 55/70/90/120ns
• Low power consumption
– 30mA maximum active current(5MHz)
– 1uA typical standby current
• Command register architecture
– Byte Programming (7us typical)
– Sector Erase (8K-Byte x1,4K-Byte x 2, 8K Bytex2, 32K-Bytex1, and 64K-Byte x1)
• Auto Erase (chip & sector) and Auto Program
– Automatically erase any combination of sectors with Erase Suspend capability.
– Automatically programs and verifies data at speci fied address
• Erase Suspend/Erase Resume
– Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation.
• Status Reply
– Data polling & Toggle bit for detection of program and erase cycle completion.
• Chip protect/unprotect for 5V only system or 5V/12V system
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1 to VCC+1V
• Boot Code Sector Architecture
– T = Top Boot Sector
– B = Bottom Boot Sector
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
– 32-pin PLCC
– 32-pin TSOP
– 32-pin PDIP
• Boot Code Sector Architecture
– T=Top Boot Sector
– B=Bottom Boot Sector
• 20 years data retention