The NCV4279B is a 5.0 V precision micropower voltage regulator. The output current capability is 150 mA.
The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature drawing only 90 μA with a 100 μA load. This part is ideal for any and all battery operated microprocessor equipment.
Microprocessor control logic includes an active RESET (with DELAY), and a FLAG monitor which can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allows the microprocessor to finish any signal processing before the RESET shuts the microprocessor down.
The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits.
The reset threshold voltage can be decreased by the connection of external resistor divider to RADJ lead.
The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions.

FEATUREs
• 5.0 V ± 2.0% Output
• Low 90 μA Quiescent Current
• Active RESET
• Adjustable Reset
• 150 mA Output Current Capability
• Fault Protection
   − +60 V Peak Transient Voltage
   − −15 V Reverse Voltage
   − Short Circuit
   − Thermal Overload
• Early Warning through FLAG/MON Leads
• Internally Fused Leads in SO−14 and SO−20L Packages
• NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes