General Description
The NT7701 is a 160-bit output segment/common driver LSI suitable for driving the large scale dot matrix LCD panels used by PDA's, personal computers and work stations for example. Through the use of SST (Super Slim TCP) technology, it is ideal for substantially decreasing the size of the frame section of the LCD module. The NT7701 is good as both a segment driver and a common driver, and a low power consuming, high-precision LCD panel display can be assembled using the NT7701. In the segment mode, the data input is selected 4bit parallel input mode or as 8bit parallel input mode by a mode (MD) pin. In common mode, the data input/output pins are bi-directional and the four data shift directions are pin-selectable.

FEATUREs
(Segment mode)
■ Shift Clock frequency :
   14 MHz (Max.) (VDD = 5V ± 10%)
   8 MHz (Max.) (VDD = 2.5V - 4.5V)
■ Adopts a data bus system
■ 4-bit/8-bit parallel input modes are selectable with a mode (MD) pin
■ Automatic transfer function with an enable signal
■ Automatic counting function when in the chip select mode, causes the internal clock to be stopped by automatically counting 160 bits of input data (Common mode)
■ Shift clock frequency: 4.0MHz (Max.)
■ Built-in 160-bits bidirectional shift register (divisible into 80-bits x 2)
■ Available in a single mode (160-bits shift register) or in a
   dual mode (80-bits shift register x 2)
   1. Y1 → Y160 Single mode
   2. Y160 → Y1 Single mode
   3. Y1 → Y80, Y81 → Y160 Dual mode
   4. Y160 → Y81, Y80 → Y1 Dual mode
   The above 4 shift directions are pin-selectable
   (Both segment mode and common mode)
■ Supply voltage for LCD drive: 15.0 to 30.0V
■ Number of LCD driver outputs: 160
■ Low output impedance
■ Low power consumption
■ Supply voltage for the logic system: +2.5 to +5.5V
■ COMS process
■ Package : 190pin TCP (Tape Carrier Package)
■ Not designed or rated as radiation hardened