GENERAL DESCRIPTION
The OP200 is the first monolithic dual operational amplifier to offer OP77 type precision performance. Available in the industry standard 8-pin pinout, the OP200 combines precision performance with the space and cost savings offered by a dual amplifier.
The OP200 features an extremely low input offset voltage of less than 75 mV with a drift below 0.5 mV/∞C, guaranteed over the full military temperature range. Open-loop gain of the OP200 exceeds 5,000,000 into a 10 kW load; input bias current is under 2 nA; CMR is over 120 dB and PSRR below 1.8 mV/V. On-chip zener zap trimming is used to achieve the extremely low input offset voltage of the OP200 and eliminates the need for offset pulling.
Power consumption of the OP200 is very low, with each amplifier drawing less than 725 mA of supply current. The total current drawn by the dual OP200 is less than one-half that of a single OP07, yet the OP200 offers significant improvements over this industry standard op amp. The voltage noise density of the OP200, 11 nV/÷Hz at 1 kHz, is half that of most competitive devices.
The OP200 is pin compatible with the OP221, LM158, MC1458/1558, and LT1013.
The OP200 is an ideal choice for applications requiring multiple precision op amps and where low power consumption is critical.
For a quad precision op amp, see the OP400.

FEATURES
   Low Input Offset Voltage: 75 μV Max
   Low Offset Voltage Drift, Over –55°C < TA < +125°C: 0.5 μV/°C Max
   Low Supply Current (Per Amplifier): 725 mA Max
   High Open-Loop Gain: 5000 V/mV Min
   Low Input Bias Current: 2 nA Max
   Low Noise Voltage Density: 11 nV/÷Hz at 1 kHz
   Stable with Large Capacitive Loads: 10 nF Typ
   Pin Compatible to OP221, MC1458, and LT1013 with Improved Performance
   Available in Die Form