GENERAL DESCRIPTION
The Camera Digital Signal Processor (CAMDSP) is intended for use with a mosaic filter colour CCD. The IC generates luminance and chrominance signals from the CCD signal. The device consists of a luminance and colour separator employing two 768 × 9 line memories, a PAL/NTSC encoder, a dual 8-bit video DAC, a Sync Signal Generator (SSG) and a simple serial interface to control many settings.
FEATURES
• Y/C separator for mosaic filter colour CCD which can be used with PAL or NTSC CCDs with horizontal resolution of 510, 670, 720 or 768 pixels
• Line sequential colour processing (R−Y) and (B−Y)
• 9 bit input signal (the internal processing is 10-bit)
• Digital feedback clamp control for Y/C separation
• Two 768 × 9 line memories for Y/C separation
• Aperture correction using phase linear filters
• Coring of LOW level signals to reduce noise
• Colour encoder in accordance with the PAL or NTSC system. Colour subcarrier is made by a discrete time oscillator (DTO) operating on system clock
• Slew rate controlled outputs for reduction of digital noise
• RGB inputs for title mix
• High accuracy 8 bit DAC outputs for luminance and chrominance signals
• Sync Signal Generator (SSG) to generate all necessary timing signals
• Serial interface for microprocessor control of CAMDSP settings
• Y and C signals accessible to incorporate digital features
• Including digital feature functions (mosaic, sepia, solarization, slice and negative/positive inversion).