Summary of Features
For a quick overview and easy reference, the features of the XE167xM are summarized here.
• High-performance CPU with five-stage pipeline and MPU
   – 12.5 ns instruction cycle at 80 MHz CPU clock (single-cycle execution)
   – One-cycle 32-bit addition and subtraction with 40-bit result
   – One-cycle multiplication (16 × 16 bit)
   – Background division (32 / 16 bit) in 21 cycles
   – One-cycle multiply-and-accumulate (MAC) instructions
   – Enhanced Boolean bit manipulation facilities
   – Zero-cycle jump execution
   – Additional instructions to support HLL and operating systems
   – Register-based design with multiple variable register banks
   – Fast context switching support with two additional local register banks
   – 16 Mbytes total linear address space for code and data
   – 1024 Bytes on-chip special function register area (C166 Family compatible)
   – Integrated Memory Protection Unit (MPU)
• Interrupt system with 16 priority levels for up to 96 sources
   – Selectable external inputs for interrupt generation and wake-up
   – Fastest sample-rate 12.5 ns
• Eight-channel interrupt-driven single-cycle data transfer with Peripheral Event Controller (PEC), 24-bit pointers cover total address space
• Clock generation from internal or external clock sources, using on-chip PLL or prescaler
• Hardware CRC-Checker with Programmable Polynomial to Supervise On-Chip Memory Areas
• On-chip memory modules
   – 8 Kbytes on-chip stand-by RAM (SBRAM)
   – 2 Kbytes on-chip dual-port RAM (DPRAM)
   – Up to 16 Kbytes on-chip data SRAM (DSRAM)
   – Up to 32 Kbytes on-chip program/data SRAM (PSRAM)
   – Up to 576 Kbytes on-chip program memory (Flash memory)
   – Memory content protection through Error Correction Code (ECC)
• On-Chip Peripheral Modules
   – Multi-functional general purpose timer unit with 5 timers
   – 16-channel general purpose capture/compare unit (CAPCOM2)
   – Up to 4 capture/compare units for flexible PWM signal generation (CCU6x)
   – Two Synchronizable A/D Converters with a total of up to 24 channels, 10-bit resolution, conversion time below 1 μs, optional data preprocessing (data reduction, range check), broken wire detection
   – Up to 8 serial interface channels to be used as UART, LIN, high-speed synchronous channel (SPI), IIC bus interface (10-bit addressing, 400 kbit/s), IIS interface
   – On-chip MultiCAN interface (Rev. 2.0B active) with up to 128 message objects (Full CAN/Basic CAN) on up to 6 CAN nodes and gateway functionality
   – On-chip system timer and on-chip real time clock
• Up to 12 Mbytes external address space for code and data
   – Programmable external bus characteristics for different address ranges
   – Multiplexed or demultiplexed external address/data buses
   – Selectable address bus width
   – 16-bit or 8-bit data bus width
   – Five programmable chip-select signals
   – Hold- and hold-acknowledge bus arbitration support
• Single power supply from 3.0 V to 5.5 V
• Programmable watchdog timer and oscillator watchdog
• Up to 119 general purpose I/O lines
• On-chip bootstrap loaders
• Supported by a full range of development tools including C compilers, macro assembler packages, emulators, evaluation boards, HLL debuggers, simulators, logic analyzer disassemblers, programming boards
• On-chip debug support via Device Access Port (DAP) or JTAG interface
• 144-pin Green LQFP package, 0.5 mm (19.7 mil) pitch