GENERAL DESCRIPTION
The SPT9405 is a single video line driver chip that takes a standard video signal as an analog input and provides a buffered analog output for driving a 150 Ω load (75 Ω backterminated cable). The standard video input signal (1 VP-P) is internally clamped and amplified 6 dB using internal circuitry and feedback resistors to produce a 2 VP-P into an ACcoupled 150Ωload.The internal 1.5 kΩ resistor provides gain compensation for low frequency signals. (See the typical interface circuit diagram.)

FEATURES
• Single Video Line Driver Chip
• Internal Clamp and Feedback Resistors
• RL=150 Ω (75 Ω Back-Terminated Cable)
• Power-Down Standby Mode
• Tiny 2.9 x 1.6 mm 6-Lead SOT23 Package
• Low Power Dissipation: 37.5 mW
• 1 VP-P Input Range, 6 dB Voltage Gain
• Flat Response fIN = 100 kHz to 10 MHz (typical)
• Single +5 Volt Power Supply

APPLICATIONS
• Digital Video Disk
• Video Line Driver for Encoders
• Digital Video Tape Recorders
• Video Cassette Recorders
• PC Multimedia
• Consumer Video